Jupiter Heating.com

Directory: Catalog > Water Heaters > Bock Water Heaters

Bock Power Gas Water Heaters, with Carlin Burner

Bock Water Heater - Power Gas

Providing quality in construction, efficiency in performance and durability in operation has earned Bock Water Heaters a bit of a reputation: they're recognized as the leader in gas-fired water heaters. And fan-assisted burners give Bock Power Gas water heaters increased recovery rates, clean combustion and higher efficiencies.

  • Turboflue® - Bock's patented design is the industry's most advanced and efficient heat exchanger. Simply put, it heats water faster and uses less fuel, which reduces energy costs. Read more about Turboflue® at the bottom of this page.
  • C-Glass®- Durable and exclusive porcelain enamel glass is used to line all tanks and Turboflues. Highly resistant to aggressive water. Fresh silica mixed daily to provide the highest quality.
  • Built to last - Hand-crafted from heavy gauge steel. Longer life equals a higher "Return on Investment".
  • Dual magnesium anode rods - Inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the welded seams of the tank.
  • Double pressure tested - Only Bock pressure tests its tanks twice.
  • Fully welded tank skirt - prevents noxious flue gases from escaping between the tank and jacket.
  • Center flue design - reduces tank flex for longer life.
  • Fiberglass insulation - decreases standby heat loss.
  • Accurate temperature control - Only Bock offers dual aquastats or operating and high limits, as standard.
  • Spring loaded inspection door - Easy access for inspection and maintenance, also functions as a pressure relief valve.
  • Brass drain valve - Accessible, tamper-proof.
  • Factory installed T&P valve - CSA listed.
  • Hand-cast refractory lined combustion chamber - Only one in the industry - better heat retention, warmer starts, better combustion, reduces noxious emissions.
  • UL listed.
  • ASME construction - available on selected models.
  • Externally mounted burner - provides easy installation and maintenance.
  • All models 32PG through 361PG have 5 year limited warranty on steel tank (single family residential installations), 3 year limited warranty otherwise. The 541PG models a 3 year limited warranty.
  • Fan-assisted burner - facilitates proper system draft, provides clean, controlled combustion and higher efficiencies. Direct spark ignition - with flame rod controls provides fail safe operation. Connects to standard chimney - or a power vented system. Barometric draft regulator.
  • Supplied with a Midco or Carlin Burner (select models).
  • LP gas optional (please add to shopping cart under Options)
  • Units listed are 115 volt 60 Hz 1ph; ask about optional 220 volt 50 Hz.
  • Models 33PG and 40PG feature patented sediment agitating inlet technology.
  • All Bock Water Heaters require field setup and adjustment using combustion testing equipment per NFPA Standards (Read notice at the bottom of this page).
  • Read a lengthy list of Frequently Asked Questions about Bock Water Heaters, as well help on removing water heater anode rods.
  • Manufacturers may change product specifications and information at any time without notice.  For additional information, please visit the manufacturer's web site.
  • Download Literature: Loading times will vary depending on the speed of your Internet connection. After the download is complete, use your browser's back arrow to return to this page.

To order a Bock tank without the burner and controls, go to Bock Replacement "Tank Only" Prices

 

Bock Power Gas Water Heaters

Midco Burner Carlin Burner  
Bock 32PG Power Gas Water Heater
32 Gallon

104,000 BTU
Recovery: 109 gal./hr. @ 90°F Rise
Shipping Wt. 260 lb.
58006
$2,785.00 $2,785.00 Get shipping quote.
Bock 33PG Power Gas Water Heater
33 Gallon

104,000 BTU
Recovery: 109 gal./hr. @ 90°F Rise
Shipping Wt. 270 lb.
58011
$3,025.00 $3,025.00 Get shipping quote.
Bock 50ESPG Power Gas Water Heater
50 Gallon

140,000 BTU
Recovery: 147 gal./hr. @ 90°F Rise
Shipping Wt. 345 lb.
58001
$3,350.00 $3,350.00 Get shipping quote.
Bock 51PG Power Gas Water Heater
50 Gallon

152,000 BTU
Recovery: 162 gal./hr. @ 90°F Rise
Shipping Wt. 330 lb.
58021
$3,430.00 $3,430.00 Get shipping quote.
Bock 72PG Power Gas Water Heater
68 Gallon

199,000 BTU
Recovery: 210 gal./hr. @ 90°F Rise
Shipping Wt. 560 lb.
58040
$3,975.00 $3,975.00 Get shipping quote.
Bock 120PG Power Gas Water Heater
119 Gallon

155,000 BTU
Recovery: 162 gal./hr. @ 90°F Rise
Shipping Wt. 700 lb.
58127
$5,660.00 $5,660.00 Get shipping quote.
Bock 361PG Power Gas Water Heater
91 Gallon

385,000 BTU
Recovery: 436 gal./hr. @ 90°F Rise
Shipping Wt. 1,110 lb.
58140
$8,335.00 N/A Get shipping quote.
Bock 541PG Power Gas Water Heater
83 Gallon - Natural Gas

623,000 BTU
Recovery: 654 gal./hr. @ 90°F Rise
Shipping Wt. 1,350 lb.
58165
$11,850.00 N/A Get shipping quote.
Bock 541PG Power Gas Water Heater, ASME Certification
83 Gallon - LP Gas (Propane)

623,000 BTU
Recovery: 641 gal./hr. @ 90°F Rise
Shipping Wt. 1,3700 lb.
58185
$13,565.00 N/A Get shipping quote.

Bock Replacement Tanks and Other Options:

To order a Bock tank without the burner and controls, go to:
Bock Replacement "Tank Only" Prices

LP Gas Conversion
58008
     

 

*IMPORTANT: By purchasing this water heater from JupiterHeating.com, the customer is agreeing that the unit will be installed by a licensed, professional heating contractor; that the customer and installer will follow all local zoning regulations, as well as all manufacturer's installation instructions, policies, and warranty requirements; and that the customer has read and understood JupiterHeating.com's Terms of Sale.

Bock Water Heater's TurboFlue® - Unique Design, Patented Results

TURBOFLUE® is the most advanced heat exchanger throughout the industry. This patented multi-finned heat exchanger minimizes waste heat, transferring it to water for greater efficiency and higher energy savings.

TURBOFLUE® has been in every gas and oil heater Bock Water Heaters has manufactured since it received its second patent in 1960. Bock uses C-GLASS, an exceptionally high-quality porcelain enamel lining that exceeds industry standards by 53% and two (or more) large magnesium anode rods in each heater.

Choosing a Bock water heater is easy. They make custom water heaters to meet your requirements. There are many sizes, features and options to choose from. They may also be installed in a series for high water demands.

TuboflueTURBOFLUE® - Only Bock Water Heaters have it! The Turboflue® transfers more than twice as much heat as a bare tube with baffle. Bock continues to be the leading manufacturer of water heaters because of this incredible invention. The patented Turboflue® fins extend two-thirds up the length of the flue from the lower end - the lower fins are placed in the flue, the better the heater will function. This multi-firmed configuration is tightly welded to perfection. It allows the water to heat much faster using less fuel. Because this is extremely efficient, the heat loss is minimal and the standby losses are reduced significantly: Lower exhaust temperature by 200° - 400° over competitors models of similar input. Bock uses heavy, 12 gauge steel in all waters heaters.

Bock's PowerPlus water heaters are installed with high efficiency burners and foam insulation providing ultimate performance when you need it. These are the highest efficiency ratings in the industry.

Balanced Combustion SystemBurner Field Setup and Adjustment Notice for Bock Water Heaters

Water heaters require field setup and adjustment using proper combustion testing equipment. Although the primary air for combustion is preset for the appropriate firing rate at the factory, this setting is only a starting point and fine-turning is required when the burner is placed into service. The combustion testing of all burners is essential at the time of startup in order to insure the equipment is operating in a safe and efficient manner. It should be noted that combustion testing is required under NFPA Standard 31 for oil-fired burners, and NFPA 54 for gar-fired units. This the responsibility of a licensed installer.

If these units are not properly set up and adjusted on startup, the customer can experience nuisance safety lockout conditions. Other conditions such as improper combustion can result in equipment damage, property damage, excessive levels of combustion by-products (CO- Carbon Monoxide, CO2 - Carbon Dioxide, NOX - Nitrous Oxide) as well as smoke and soot. All of which are both harmful to the occupants and the environment.

Should a customer require technical support or have a warranty issue with the fuel burning equipment, we suggest that they contact the burner manufacturer directly in order to save time in resolving any issues they may have.

 

Bock Water Heaters

Information Source: Bock Water Heaters