Jupiter Heating.com

Directory: Catalog > Water Heaters > Bock Water Heaters

Bock Anode Rods

We stock standard (straight) and linked anode rods for the most common Bock Water Heater models. They are made from magnesium.

The rods marked as "straight" are a solid piece of metal and must go straight down into the top of the tank. Make sure you have enough ceiling height to get the rod into the top of the tank. The customer can also cut the end off to create a shorter length of rod if needed.

The rods marked as "linked" permit the customer to more easily service the tank, eliminating any ceiling height issues. They have three sections for the 30 inch rods, and four sections for the 36 inch rods.

Download Literature: Loading times will vary depending on the speed of your Internet connection. After the download is complete, use your browser's back arrow to return to this page.

 

Place Order*
Bock Anode Rod, STRAIGHT - 3/4 in. x 30 in.
Models 32E, 32PP, 50ES; 32PG
15010
$40.00
Bock Anode Rod, LINKED - 3/4 in. x 30 in.
Models 32E, 32PP, 50ES; 32PG
15110
$52.00
Bock Anode Rod, STRAIGHT - 3/4 in. x 36 in.
Models 40E, 40PP, 51E, 51PP, 72E; 40PG, 51PG, 72PG
15020
$42.00
Bock Anode Rod, LINKED - 3/4 in. x 36 in.
Models 40E, 40PP, 51E, 51PP, 72E; 40PG, 51PG, 72PG
15120
$55.00
Bock Anode Rod, STRAIGHT - 1 in. x 40 in.
Models 120E, 190E, 241E, 361E
15090-40
$45.00

 

Bock Water Heaters

Information Source: Bock Water Heaters