| Part # |
Description |
| 7250P-005 |
Gasket for Spark Electrode and Flame Rectification Probe |
| 7250P-014 |
Control Board, Pre-925 Controller - No Longer Available. See upgrade kit R17250P-431. |
| 7250P-017 |
Spark Ignition Cable |
| 7250P-018 |
Eco Cable |
| 7250P-019 |
ECO / High Limit Sensor |
| 7250P-020 |
Inlet Temp Probe Cable |
| 7250P-022 |
Transformer |
| 7250P-023 |
Line Cable |
| 7250P-024 |
Thermostat Cable |
| 7250P-025 |
Low Voltage Cable |
| 7250P-026 |
Pump Cable |
| 7250P-037 |
Honeywell Venturi |
| 7250P-038 (Discontinued) |
Gas Valve
(Use use Dungs Gas Valve 7250P-451 with Gas Valve Conversion Kit 7250P-645) |
7250P-043
(new # 7250P-249) |
Burner |
| 7250P-049 |
Flame Rectification Probe (with Gasket) - aka Flame Rectifier |
| 7250P-058 |
Spark Electrode |
| 7250P-059 |
Thermistor Inlet/Outlet |
| 7250P-069 |
Screw for Spark Electrode and Flame Rectification Probe |
| 7250P-070 |
Burner Gasket |
| 7250P-080 |
T& P Valve |
| 7250P-081 |
Water Pressure Switch |
| 7250P-086 |
Blower Motor (with Gasket) |
| 7250P-089 |
Temperature Switch Thermodisc 210 |
| 7250P-090 |
EBM Blower Cable |
| 7250P-147 |
Air Pressure Switch |
| 7250P-138 |
Honeywell Gas Valve Conversion Kit (Natural Gas to Propane) |
| 7250P-169 |
Burner Door |
| 7250P-204 |
Burner Door Screws (Self Tapping) |
| 7250P-211 |
Temperature / Pressure Gauge |
| 7250P-226 |
Blower Motor Gasket |
7250P-249
(old # 7250P-043) |
Burner |
| R17250P-431 (new # 0R17250P1102) |
Control Board Upgrade Kit
- Includes 926 Control Board, Display and all components required to replace the original Honeywell board.
- The previous part number for the board was 7250P-014, but is now obsolete.
- If the board has previously been replaced in the past with a 925 or a 926 board, order 926 Control Board, part # 7250P-731.
|
| . |
|
