| Part # |
Description |
| 7000P-805 |
Clear Tubing 3/16 ID X 5/16 OD |
| 7250P-005 |
Gasket (Flame Rectification Probe/Spark Electrode) |
| 7250P-059 |
Thermistor |
| 7250P-069 |
Screw M4 x 8 MM (Flame Rectification Probe/Spark Electrode) |
| 7250P-080 |
Relief Valve |
| 7250P-081 |
Water Pressure Switch (with O-Ring) |
| 7250P-150 (new # 64980007) |
Blocked Vent Pressure Switch |
| 7250P-152 |
O-Ring (Barbed Fitting & Pressure Switch) |
| 7250P-154 (new # 64980137) |
S.S. Barbed Fitting (with O-Ring) |
| 7250P-160 |
Ceramic Target Wall |
| 7250P-210 |
Nylon Hose Clamp |
| 7250P-219 |
High Pressure Relief Valve |
| 7250P-352 |
Control Board Hold Down Clips |
| 7250P-378 |
Control Board Fuse |
| 7250P-478 |
Screws M5 X 12MM (Combustion Blower) |
| 7250P-517 |
Flow Switch |
| 7250P-644 (new # 64980046) |
Gas Valve Adapter Plate (with Screws) |
| 7250P-653 |
Spark Cable |
| 7250P-714 |
Natural Gas to Propane Gas Conversion Kit |
| 7250P-715 |
Propane to Natural Gas Conversion Kit |
| 7250P-718 |
Screw M4 x 25MM (Gas Valve) |
7250P-731
(also use 7500P-1043) |
926 Control Board Upgrade Kit
- For units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board (with Fuse) 7350P-008, Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
| 7250P-739 |
Flue ECO (with O-Ring) |
7350P-008
(also use 7500P-1103) |
926 Control Board (with Fuse)
- For units built after July, 2008, or if the board has been previously upgraded from 925 to 926 |
| 7350P-009 (new # 64980136) |
926 Display (Card and Ribbon Cable) |
| 7350P-020 |
Spark Electrode (with Gasket) |
| 7450P-222 (same as 7250P-499) |
High Pressure Temperature / Pressure Gauge |
| 7500P-003 |
Water Pressure Switch Adapter (with O-Ring) |
| 7500P-008 |
Gasket (Concentric Flue Outlet) |
| 7500P-014 |
Composite Module |
| 7500P-017 |
Burner |
| 7500P-020 |
Concentric Flue Outlet Assembly |
| 7500P-026 |
O-Ring (Supply/Return Manifold) |
| 7500P-028 |
Contender Cover |
| 7500P-029 |
Supply Manifold Assembly (with O-Ring) |
| 7500P-030 |
Return Manifold Assembly (with O-Ring) - Discontinued, no longer available |
7500P-031
(old # 7500P-195) |
Combustion Blower Motor (with Screws) |
| 7500P-033 |
High Limit Sensor |
| 7500P-039 |
Flame Rectification Probe (with Gasket) |
| 7500P-049 |
Lip Style Grommet - 1/2 in. |
| 7500P-050 |
Lip Style Grommet - 1 in. |
| 7500P-053 |
Low Voltage Wiring Harness |
7500P-054
(old # 7500P-301) |
9 Pin Wiring Harness |
| 7500P-055 |
5 Pin Wiring Harness |
| 7500P-057 |
Condensate Hose (Clear) |
| 7500P-058 |
925 Display (Card and Front Panel) |
| 7500P-067 |
Nuts - M6 (Burner Door) |
| 7500P-068 |
Torx Screw (Air/Gas Channel) |
| 7500P-073 |
Clamp - Module to Bracket (with Screws) |
| 7500P-074 |
Gasket (Burner) |
| 7500P-075 (new # 64980043) |
Gasket (Air Channel to Combustion Blower) |
| 7500P-076 |
Burner Door Ceramic Refractory |
| 7500P-077 |
Water Pressure Switch Clip |
| 7500P-078 |
Burner Door |
| 7500P-079 |
Air/Gas Channel (with Torx Screws) |
| 7500P-080 |
Supply/Return Manifold Clip |
| 7500P-090 |
Condensate Cup (with Overflow Switch) |
| 7500P-094 |
O-Ring (Gas Valve Piping Assembly) |
| 7500P-095 |
Gas Valve Piping Assembly |
| 7500P-098 |
Temperature / Pressure Gauge |
| 7500P-099 |
Screws M5 x 12MM (Gas Valve Piping Assembly) |
| 7500P-100 |
O-Ring (Water Pressure Switch) |
| 7500P-105 |
Screws M4 X 12MM (Gas Valve Adapter Plate) |
| 7500P-115 |
Screw # 6 X 14 (Control Board) |
| 7500P-124 |
O-Ring (Water Pressure Switch Adapter) |
| 7500P-180 |
Gas Valve (with Swirl Plate, Screws) |
| 7500P-184 (new # 64980047) |
Air Intake Adapter |
| 7500P-185 (new # 64980050) |
Air Intake Adapter |
| 7500P-186 |
Gas Valve Swirl Plate |
| 7500P-189 |
2 in. Flex Hose - 25 in. Long |
7500P-195
(new # 7500P-031) |
Combustion Blower Motor (with Screws) |
| 7500P-300 |
Universal Boiler Stand Kit |
7500P-301
(new # 7500P-054) |
9 Pin Wiring Harness |
7500P-1043
(same as 7250P-731)
|
926 Control Board Upgrade Kit
- For units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board (with Fuse) 7350P-008, Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
7500P-1103
(same as 7350P-008) |
926 Control Board (with Fuse)
- For units built after July, 2008, or if the board has been previously upgraded from 925 to 926 |
| |
|
| |
See Accessories - PC connection, vent kits, mesh screens, etc. |
| |
|
