| Part # |
Description |
| 7000P-805 (new # 64980021) |
Plastic Tubing 3/16 in. ID X 5/16 in. OD X 12 in. |
| 7250P-005 |
Gasket - Probe/Electrode |
| 7250P-059 |
Thermistor - System Supply |
| 7250P-069 |
M4 X 8MM Cheese Head Phillips |
| 7250P-069 |
Jacket Mounting Bracket |
| 7250P-150 (new # 64980007) |
Blocked Vent Pressure Switch |
| 7250P-152 |
Silicone O-Ring 2-007 - Barbed Fitting |
| 7250P-154 (new # 64980137) |
S.S. Barbed Fitting 1/4 Hose X 10-32 |
| 7250P-378 |
Fuse - Control Board - 6.3 AMPS |
| 7250P-580 |
Relay |
| 7250P-667 |
Thermistor |
| 7250P-673 |
Leveling Feet Kit |
| 7250P-739 |
Flue ECO Switch - 160 Degrees |
| 7350P-002* |
1-1/2 in. Outlet Nipple (w/O-Ring) (ModCon 300 only) 2 in. Outlet Nipple (with O-Ring) |
| 7350P-004 |
1-1/2 in. Inlet Nipple (with O-Ring) (ModCon 300 only) 2 in. Inlet/Nipple (with O-Ring) |
| 7350P-007 |
850,000 BTU ModCon Module |
| 7350P-009 (new # 64980136) |
926 Display Panel with Ribbon Cable |
| 7350P-012 |
Blower Wiring Harness (Location) |
| 7350P-015 |
1-1/2 in. Inlet/Outlet Nipple Clip (ModCon 300 only) 2 in. Inlet/Outlet Nipple Clip |
| 7350P-019 |
Burner Door refractory |
| 7350P-021 |
Spark Electrode (Includes Gasket) |
| 7350P-023 |
Flame Rectification Probe (Includes Gasket) |
| 7350P-028 |
Gasket Burner |
| 7350P-029* |
Air/Gas Channel - Conical |
| 7350P-030 |
Screw - Air Channel to Burner Door |
| 7350P-034 |
Gas Valve (Includes O-Ring, Screws) |
| 7350P-034-1 |
Swirl Plate (Includes Plate) |
| 7350P-034-2 |
Blower Adapter Flange (Includes O-Ring, Screws) |
| 7350P-034-3 |
Maximum Flow Restrictor Flange |
| 7350P-034-4 |
12MM Gas Injector |
| 7350P-034-5* |
1 in. NPT Flange |
| 7350P-034-6 |
Air Adjustment Port |
| 7350P-034-8* |
Hirschman Connector |
| 7350P-035 |
High Pressure Gas Switch w/O-Ring (Optional) |
| 7350P-036 |
Low Pressure Gas Switch w/O-Ring (Optional) |
| 7350P-038 |
Combustion Blower |
| 7350P-041* |
MOD CON Frame |
| 7350P-042* |
Electrical Box |
| 7350P-043 |
120V Wiring Harness (Location) |
| 7350P-046* |
Jacket - Upper Front (with MODCON Label, Screws) |
| 7350P-047 |
Jacket - Front (with Screws) |
| 7350P-048 |
Jacket - Lower Front (with Screws) |
| 7350P-052 |
Jacket - Top (with Screws) |
| 7350P-057 |
Jacket - Left Side (with Screws) |
| 7350P-058 |
Jacket - Right Side (with Screws) |
| 7350P-061 |
Jacket - Bottom (with Screws) |
| 7350P-062 |
Electrical Box/Access Panel Cover |
| 7350P-063 |
# 10 X 1/2 in. Self Tapping Screw |
| 7350P-064 |
Interface Gasket - Air Channel/Blower |
| 7350P-070 |
Field Connection Board |
7350P-072 |
O-Ring - Inlet/Outlet Nipple |
| 7350P-082 |
Gas Pipe Assy W/Shut-Off 1-1/4 IPS X 1 IPS |
| 7350P-089 |
Low Water Cut - Off Probe |
| 7350P-092* |
Leveling Foot Support |
| 7350P-093 |
M8 X 20MM Hex Head Bolt - Blower |
| 7350P-095* |
1 in. NPT 90 Degree Elbow |
| 7350P-096* |
1 in. X 1 in. Street Elbow |
| 7350P-097* |
1 in. NPT X 4 in. Nipple - Phosphate Coated |
| 7350P-098* |
1 in. NPT X 3 in. Nipple - Phosphate Coated |
| 7350P-099* |
1 in. Gas Ball Valve |
| 7350P-104 |
Air Inlet Bracket |
| 7350P-109* |
1-1/4 in. - 2 in. Reducing Coupling |
| 7350P-113 |
2 in. PVC Plug |
| 7350P-1202 |
926 Control Board |
| 7350P-126 |
Jacket - Rear (with Screws) |
| 7350P-129 |
Fuse - Connection Board - 3.15 AMPS |
| 7350P-138 |
Low Voltage Wiring Harness (Location) |
| 7350P-167 |
Condensate Overflow Switch |
| 7350P-220* |
Vent Adapter |
| 7350P-223 |
75# Relief Valve - 3/4 in. NPT |
| 7350P-613 |
Condensate Collector Body |
| 7350P-626 |
Thermal Fuse |
| 7350P-631 |
Burner Kit (Includes Items 2, 3, 4, 5, 6, 7, 8, 17 and 18) |
| 7500P-002 |
ECO Switch - 190 Degrees |
| 7500P-033 |
ECO High Limit Sensor (with O-Ring) |
| 7500P-067 |
Nut 6 - Burner door |
| 7500P-087 |
Power Switch |
| 7500P-100 |
O-Ring - ECO High Limit Sensor |
| 7500P-115 |
6-32 X 1/4 in. Pan Head Screw - Electronic Boards |
| SN1018* |
3/4 in. NPT X 3 in. Nipple - Brass |
