| Part # |
Description |
| 7250P-005 |
Gasket for Spark Electrode and Flame Rectification Probe |
| 7250P-019 |
ECO High Limit |
| 7250P-049 |
Flame Rectification Probe |
| 7250P-058 or 7350P-020 |
Spark Electrode (with Gasket)
|
| 7250P-059 |
Thermistor Inlet / Outlet |
| 7250P-069 |
Screw for Spark Electrode and Flame Rectification Probe |
| 7250P-070 |
Burner Gasket |
| 7250P-080 |
Relief Valve |
| 7250P-081 |
Water Pressure Switch (red dot) |
| 7250P-089 |
Thermodisc Flue ECO - 210 Degree |
| 7250P-096 |
Water Pressure Switch (blue dot) |
| 7250P-138 |
Honeywell Gas Valve Conversion Kit (Natural Gas to Propane) |
| 7250P-150 (new # 64980007) |
Blocked Vent Pressure Switch |
| 7250P-160 |
Ceramic Target Wall |
| 7250P-161 |
Burner Door Ceramic Refractory |
| 7250P-169 |
Burner Door |
| 7250P-170 |
Gasket (Burner Door to Air Channel) |
| 7250P-204 |
Burner Door Screws (Self Tapping) |
| 7250P-211 |
Temperature / Pressure Gauge - 60 PSI |
| 7250P-219 |
Relief Valve - 125 PSI (200,000 BTU) |
| 7250P-279 |
Hot Surface Ignitor - location for the HA "High Altitude" unit. |
| 7250P-332 |
LED Display Box with Ribbon Cable - DISCONTINUED
- For original 925 Control Board only. If you have already upgraded to a 926 Control Board, order the Display Board for 926 Control Board 64980136 (old # 7350P-009).
|
| 7250P-352 |
Control Board Hold Down Clips |
| 7250P-378 |
Control Board Fuse (110 Volt, 6.3 Amp) |
| 7250P-386 |
9 Pin Wiring Harness (120 Volt) - HA "High Altitude" |
| 7250P-387 |
9 Pin Wiring Harness (120 Volt) |
7250P-390
(new # 7250P-696) |
5 Pin Wiring Harness (120 Volt) |
7250P-392
(new # 7250P-653) |
Spark Cable |
| 7250P-499 |
Temperature / Pressure Gauge - 200 PSI |
| 7250P-502 |
Burner (includes Gasket) |
7250P-518
(new # 7350P-159) |
Blower Motor (with Gasket) |
| 7250P-535 |
Low Voltage Wiring Harness (10 Pin / 20 Pin) |
| 7250P-540 |
Air / Gas Valve Assembly |
| 7250P-545 |
Air Gas Mixer |
| 7250P-552 |
First Valve Solenoid |
| 7250P-553 |
Main Valve Solenoid |
| 7250P-580 |
Relay Board |
7250P-653
(old #
7250P-392) |
Spark Cable |
| 7250P-657 |
Adjustable Legs for Munchkin - Set of Four |
7250P-696
(old #
7250P-390) |
5 Pin Wiring Harness (120 Volt) |
| 7250P-712 |
Swirl Plate (mfg date 12/05/07) |
| 7250P-714-2 |
Natural Gas to Propane Gas Conversion Kit |
| 7250P-715-2 |
Propane to Natural Gas Conversion Kit |
| 7250P-724 |
Condensate Hose Assembly |
7250P-1008 (old # 7250P-731)
|
926 Control Board Upgrade Kit
- For units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board 7250P-1108 (old # 7350P-008), Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
7250P-1009
(old #
7250P-731) |
926 Control Board Upgrade Kit for HA "High Altitude" Unit
- For HA units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board 7250P-1109 (old # 7350P-008), Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
| 7250P-1108 (old # 7350P-008) |
926 Control Board
- Only purchase if the control board has previously been replaced with a 926 board
|
7250P-1109 (old # 7350P-008)
|
926 Control Board for HA "High Altitude" Unit
- Only purchase if the control board has previously been replaced with a 926 board for HA unit.
|
| 7350P-009 (new # 64980136) |
Display Board for 926 Control
- Only purchase if the control board has previously been replaced with a 926 board
|
7350P-159
(old #
7250P-518) |
Blower Motor (with Gasket) |
| 7450P-218 |
Condensate Neutralizer (formerly part # N1100) |
| |
|
| |
See Accessories - PC connection, vent kits, mesh screens, etc. |
| . |
|
