| Part # |
Description |
| 7000P-805 |
Plastic Tubing 3/16 in. ID (Blocked Vent Pressure Switch) |
| 7250P-005 |
Gasket (Flame Rectification Probe/Spark Electrode) |
| 7250P-019 |
ECO/High Limit Sensor |
| 7250P-069 |
Screw M4 X 8MM (Flame Rectification Probe/Spark Electrode) |
| 7250P-087 |
Combustion Blower (Blower Motor) |
| 7250P-089 |
Thermodisc Flue 210 Degrees |
| 7250P-096 |
Water Pressure Switch |
| 7250P-117 |
NIT Burner |
| Blocked Vent Pressure Switch |
7250P-150 (new # 64980007) |
| 7250P-151 |
Steel Push Retainer (Thermodisc Flue ECO) |
| 7250P-152 |
O-Ring 007 (Blocked Vent Pressure Switch) |
| 7250P-153 |
S.S. Hex Nut 10-32 (Blocked Vent Pressure Switch) |
| 7250P-154 (new # 64980137) |
Hose Barb 1/4 X 10-32 (Blocked Vent Pressure Switch) |
| 7250P-160 |
Ceramic Target Wall |
| 7250P-206 |
Screw Torx M5 X 22M (Air/Gas Channel to Burner Door) |
| 7250P-210 |
Hose Clamp (Condensate Assembly) |
| 7250P-219 |
Relief Valve |
| 7250P-221 |
Brass Nipple 1 in. X 1-1/4 in. X 3-3/4 in. |
| 7250P-226 |
Blower Motor Gasket |
| 7250P-311 |
PVC Black Tubing 1/8 ID (Thermodisc Flue ECO) |
| 7250P-332 |
Display Box for 925 Control Board (Discontinued) |
| 7250P-352 |
Control Board Hold Down Clips |
| 7250P-378 |
Fuse (Control Board) |
| 7250P-452 |
Gas Valve |
| 7250P-478 |
Screw M5 x 12MM (Combustion Blower) |
| 7250P-589 |
Brass Tee 1-1/4 in. x 1-1/4 in. x 1 in. (Flow Switch) |
| 7250P-591 |
Circulator Pump - 1-1/4 in. |
| 7250P-593 |
Flow Switch Paddle |
| 7250P-594 |
Mounting Flanges - 1-1/4 in. (set of two) |
| 7250P-602 |
9 Pin Wiring Harness |
| 7250P-612 |
Flow Switch (with Paddle) |
| 7250P-644 (new # 64980046) |
Gas Valve Adapter Plate |
| 7250P-646 |
PVC Tee Sch. 40 3/4 in. (Condensate Assembly) |
| 7250P-647 |
Poly Plug 3/4 in. NPT (Condensate Assembly) |
| 7250P-648 |
PVC Nipple Sch. 80 3.4 in. NPT (Condensate Assembly) |
| 7250P-649 |
Cable Clamp (Condensate Assembly) |
| 7250P-667 |
Thermistor |
| 7250P-671 |
Cabinet Latch and Gasket Kit (with Screws) |
| 7250P-673 |
Leveling Foot |
| 7250P-684 |
Burner Door |
| 7250P-687 |
Air/Gas Channel |
| 7250P-702 |
Burner Door Ceramic Refractory |
| 7250P-704 |
Screw M4 X 8MM (Ceramic Target Wall) |
| 7250P-705 |
Gas Valve Piping Assembly |
| 7250P-718 |
Screws M4 x 25MM Allen Head |
| 7250P-724 |
Condensate Hose Assembly |
| 7250P-731 |
926 Control Board Upgrade Kit
- For units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board (with Fuse) 7350P-008, Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
| 7350P-008 |
926 Control Board (with Fuse)
- For units built after July, 2008, or if the board has been previously upgraded from 925 to 926 |
| 7350P-009 (new # 64980136) |
Display Card for 926 Control |
| 7350P-020 |
Spark Electrode (with Gasket) |
| 7350P-624 |
24VAC Gas Valve Coil Only - Grey (discontinued, please order the complete gas valve assembly) |
| 7500P-039 |
Flame Rectification Probe (with Gasket) |
| 7500P-067 |
Nut M6 (Burner Door) |
| 7500P-074 |
Gasket (Air/Gas Channel to Burner) |
| 7500P-075 (new # 64980043) |
Gasket (Air/Gas Channel to Combustion Blower) |
| 7500P-093 |
Swirl Plate - Black |
| 7500P-109 |
Washer M4 (Ceramic Target Wall) |
| CA2000 (new # 7450P-282) |
Band Clamp (Exhaust Assembly) |
| |
|
| |
See Accessories - PC connection, vent kits, mesh screens, etc. |
| . |
|
