| Part # |
Description |
| 7000P-805 |
Plastic Tubing 3/16 in. ID (Blocked Vent Pressure Switch) |
| 7250P-005 |
Gasket (Flame Rectification Probe/Spark Electrode) |
| 7250P-019 |
ECO/High Limit Sensor |
| 7250P-049 |
Flame Rectification Probe |
| 7250P-069 |
Screw M4 X 8MM (Flame Rectification Probe/Spark Electrode) |
| 7250P-080 |
Relief Valve |
| 7250P-089 |
Thermodisc Flue 210 Degrees |
| 7250P-091 |
LED Display Box with Ribbon Cable
- Only if the main control board is 926.
|
| 7250P-096 |
Water Pressure Switch |
| Blocked Vent Pressure Switch |
7250P-150 (new # 64980007) |
| 7250P-151 |
Steel Push Retainer (Thermodisc Flue ECO) |
| 7250P-152 |
O-Ring 007 (Blocked Vent Pressure Switch) |
| 7250P-153 |
S.S. Hex Nut 10-32 (Blocked Vent Pressure Switch) |
| 7250P-154 (new # 64980137) |
S.S. Hose Barb 1/4 X 10-32 (Blocked Vent Pressure Switch) |
| 7250P-160 |
Ceramic Target Wall |
| 7250P-206 |
Screw Torx M5 X 22M (Air/Gas Channel to Burner Door) |
| 7250P-210 |
Hose Clamp (Condensate Assembly) |
| 7250P-311 |
PVC Black Tubing 1/8 ID (Thermodisc Flue ECO) |
| 7250P-332 |
LED Display Box with Ribbon Cable - DISCONTINUED
- Only if the main control board is 925.
|
| 7250P-352 |
Control Board Hold Down Clips |
| 7250P-378 |
Fuse (Control Board) |
| 7250P-478 |
Screw M5 x 12MM (Combustion Blower) |
| 7250P-514 |
Brass Nipple 1-1/2 in. X 2 in. X 3-3/4 in. |
| 7250P-646 |
PVC Tee Sch. 40 3/4 in. (Condensate Assembly) |
| 7250P-647 |
Poly Plug 3/4 in. NPT (Condensate Assembly) |
| 7250P-648 |
PVC Nipple Sch. 80 3.4 in. NPT (Condensate Assembly) |
| 7250P-649 |
Cable Clamp (Condensate Assembly) |
| 7250P-653 |
Spark Cable |
| 7250P-667 |
Thermistor |
| 7250P-670 |
Screws M4 X 30MM Round Head (Gas Valve) |
| 7250P-671 |
Cabinet Latch and Gasket Kit (with Screws) |
| 7250P-673 |
Leveling Foot |
| 7250P-684 |
Burner Door |
| 7250P-687 |
Air/Gas Channel |
| 7250P-696 |
5 Pin Wiring Harness |
| 7250P-697 |
9 Pin Wiring Harness |
| 7250P-699 |
Low Voltage Wiring Harness (10 Pin/20 Pin Main Wiring Harness, with Gas Valve Plug) |
| 7250P-702 |
Burner Door Ceramic Refractory |
| 7250P-703 |
NIT Burner |
| 7250P-704 |
Screw M4 X 8MM (Ceramic Target Wall) |
| 7250P-710 |
Dungs Gas Valve |
| 7250P-711 |
Gas Valve Adapter Plate |
| 7250P-712 |
Swirl Plate - Black |
| 7250P-723 |
Right Angle Connector |
| 7250P-724 |
Condensate Hose Assembly |
| 7250P-731 |
926 Control Board Upgrade Kit
- For units built before July, 2008 that have the 925 Control Board
- Includes 926 Control Board (with Fuse) 7350P-008, Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).
|
| 7250P-741 |
Krom Schroder to Dungs Gas Valve Conversion Kit |
| 7350P-008 |
926 Control Board (with Fuse)
- For units built after July, 2008, or if the board has been previously upgraded from 925 to 926 |
| 7350P-009 (new # 64980136) |
Display Card and Ribbon Cable (without box)
- Only if the main control board is 926.
|
| 7350P-020 |
Spark Electrode (with Gasket) |
| 7350P-159 |
Combustion Blower (Blower Motor) |
| 7350P-623 |
24VAC Gas Valve Coil Only - Grey (discontinued, please order the complete gas valve assembly) |
| 7500P-067 |
Nut M6 (Burner Door) |
| 7500P-074 |
Gasket (Air/Gas Channel to Burner) |
| 7500P-075 (new # 64980043) |
Gasket (Air/Gas Channel to Combustion Blower) |
| 7500P-105 |
Screw M5 x 12MM (Gas Valve Adapter Plate) |
| 7500P-109 |
Washer M4 (Ceramic Target Wall) |
| |
|
| |
See Accessories - PC connection, vent kits, mesh screens, etc. |
| . |
|
